Page 3 of 3

Re: NRF24L01 and AVR - Does not transmit / Receive

PostPosted: Fri Oct 10, 2014 3:45 pm
by brennen
When you get an RX_DR interrupt, you may want to try clearing all of the interrupt flags, rather than just RX_DR. I notice you point out that TX_DS is set unexpectedly at the RX.

Re: NRF24L01 and AVR - Does not transmit / Receive

PostPosted: Sat Oct 11, 2014 3:07 am
by rrupad
I am doing blind transmit and receive. No EN_AA, No Retries - nothing...

Re: NRF24L01 and AVR - Does not transmit / Receive

PostPosted: Sat Oct 11, 2014 2:37 pm
by rrupad
Hi Brennen:

Got it to work!! Transmitting from across the rooms.

Thanks a lot..