nRF24l01 & atmega32

Discussion about wireless devices

nRF24l01 & atmega32

Postby mehdi_bm » Mon Jul 25, 2016 10:40 am

I plan to use nRF24l01 module to connect two atmega 32 uCs through RF. I used the library provided by As far as I know CE, CSN, and IRQ should be set as output, but in the tutorial accompanied with the library, it is instructed differently and the CE and IRQ should be set as input. and also nowhere in the library the pins were set.

I want to know whether anyone used the library, and if so, why these instructions are different.
Posts: 1
Joined: Mon Jul 25, 2016 8:08 am

Re: nRF24l01 & atmega32

Postby brennen » Tue Jul 26, 2016 2:01 pm

It's most likely just a typo in the tutorial. CE and CSN are set as outputs, and IRQ is an input (from the microcontroller's perspective).
Site Admin
Posts: 395
Joined: Sun Aug 17, 2008 2:15 pm

Return to Wireless

Who is online

Users browsing this forum: No registered users and 1 guest