Page 1 of 1

nRF24LU1 Stamp Eagle Layout...

PostPosted: Wed Oct 21, 2009 5:51 am
by cap9qd
I am building a board that contains (will contain...) an nRF24LU1 Stamp with the RP-SMA antenna. So I built an Eagle library for the part. Not sure if this will help anyone else but I thought it was a nicer solution than just using pin-headers in my schematic/pcb. Anyway...I can be downloaded from here:

http://web.mst.edu/~cap9qd/files/diyEmbedded_Eagle.zip

This is provided with no warranty....blah blah blah...