Restoring the Info Page

Questions for programming 8051 microcontrollers in C or assembly using SDCC

Restoring the Info Page

Postby baruch » Mon Nov 17, 2014 10:26 am

I had my arduino programmer miswired and managed to erase the info page, it is now showing all 0xFF. I have in my hand only one unit so I cannot now copy from another, can anyone share what needs to be in the info page so I can try to write it back and recover the unit I have?

Thanks!
baruch
 
Posts: 14
Joined: Mon Nov 17, 2014 10:15 am

Re: Restoring the Info Page

Postby baruch » Thu Nov 20, 2014 11:57 am

I got an InfoPage from another unit, here is it for others who may hit the same issue (37 bytes, starting from offset 0):

{
90, 90, 67, 65,
87, 48, 49, 55,
12, 49, 33, 36,
42, 84, 136, 159,
38, 177, 81, 16,
11, 255, 255, 255,
255, 130, 255, 255,
255, 255, 0, 0,
255, 255, 255, 255,
255,
};
baruch
 
Posts: 14
Joined: Mon Nov 17, 2014 10:15 am


Return to 8051 Programming

Who is online

Users browsing this forum: No registered users and 1 guest

cron